| Last Modified: 11-29-2007 | 1.6 A | |
| Service Category: Audio/Visual/Telematics | Section: Park Assist/Monitoring | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM000001PYC00YX |
| Title: PARK ASSIST / MONITORING: ULTRASONIC SENSOR (for Front Side): INSTALLATION (2008 Sequoia) | ||
INSTALLATION
1. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER
|
(a) Install the ultrasonic sensor retainer to the front bumper. NOTICE:
Do not damage the bumper with the snap when installing the retainer. HINT:
When installing the retainer, align the keyhole and snap as shown in the illustration. |
2. INSTALL NO. 1 ULTRASONIC SENSOR
|
(a) Engage the 2 claws and install the ultrasonic sensor. |
(b) Connect the sensor connector.
3. INSTALL FRONT BUMPER COVER
4. INSTALL FRONT END PANEL LH (w/o Headlight Cleaner System)
5. INSTALL FRONT END PANEL RH (w/o Headlight Cleaner System)
HINT:
Use the same procedure as for the LH side.
6. INSTALL FRONT END PANEL LH (w/ Headlight Cleaner System)
7. INSTALL FRONT END PANEL RH (w/ Headlight Cleaner System)
HINT:
Use the same procedure as for the LH side.
8. PREPARE VEHICLE FOR FOG LIGHT AIMING ADJUSTMENT (w/ Fog Light)
9. PREPARE FOR FOG LIGHT AIMING (w/ Fog Light)
10. INSPECT FOG LIGHT AIMING (w/ Fog Light)
11. ADJUST FOG LIGHT AIMING (w/ Fog Light)
|
|